Complete thermoform kit for a hollow Santa ornament
Ready-to-print thermoform kit for a hollow Santa Claus face ornament: heat a thin plastic sheet, press it between the female and male molds, and it forms a glossy shell with the Santa face. Each shell closes onto a printed base plate carrying the Santa artwork in four colours, and the two halves join with the screw cap + clip into one hollow hanging ornament — no customization needed, just slice, print and form.
Complete kit: the ZIP carries the mold pair, the four-colour base plates and the screw-cap closure, ready to slice and print
Screw-cap closure: the cap doubles as the hanger for a ribbon or cord
Material split: the molds are preferably printed in PETG so they don't stick to the PLA base when it gets hot during forming (PLA fuses to PLA; PETG doesn't); base plates, cap and clip print in regular PLA
Plating options: Santa-Full (both base plates in one print), Santa-Left / Santa-Right (one half each), plus separate Santa-Molds and Santa-Connectors files
Customizable version available: this printable is the ready-made counterpart of the Thermoform Generator model
Santa-Full (base plates, PLA, four colours): 1 h 16 min, 21.44 g
Santa-Molds (PETG): 3 h 59 min, 171.32 g
Santa-Connectors (cap + clip, PLA): 9 min, 0.99 g
Already set in the files (Santa-Full / Santa-Left / Santa-Right — no need to change anything):
0 top layers, 0 bottom layers
25% gyroid infill on the base
50% infill on the colours
Materials:
Molds: PETG (recommended — PLA molds can fuse to the PLA base when it gets hot during forming; PETG doesn't stick)
Base plates and connectors: PLA
Layer Heights:
Molds: 0.24mm (faster)
Base plates: 0.20mm Standard
Connectors (cap + clip): 0.16mm High Quality (clean threads)
Print Time & Filament:
Santa-Full (base plates, PLA, four colours): 1 h 16 min, 21.44 g
Santa-Molds (PETG): 3 h 59 min, 171.32 g
Santa-Connectors (cap + clip, PLA): 9 min, 0.99 g
Tags: thermoforming, christmas-ornament, santa-claus, mold-kit, hanging-ornament, multi-color, petg-molds, ready-to-print