Five plain edges, 8 cm opening, snap fit without glue
Ready-to-print photo ornaments for the Christmas tree in five plain edges: simple, scallop, wavy, wavy square and zigzag. The front snaps over the back with no glue, holding a photo or a laser-cut acrylic in an 8 cm opening.
Five edge styles: simple, scallop, wavy, wavy square and zigzag, each as a single-colour frame with no artwork layer.
8 cm opening: round on four styles, square on the wavy square.
Two depths per edge: Thick (Grosso) for a 2 mm acrylic, Thin (Fino) for a paper photo.
Snap fit, no glue: a finger hole behind the photo pushes it back out when you want to change it.
Cutting guide included: a flat 0.8 mm template, 0.5 mm smaller than the opening all round, to lay on the photo and cut around.
ZIP contents: Thick-Grosso/ and Thin-Fino/, each with Simple/, Scallop/, Wavy/, WavySquare/ and Zigzag/ holding OrnamentFrame-Full.3mf (both halves on one plate) and OrnamentFrame-Guide.3mf.
0.16mm High Quality profile
Tags: christmas, photo-frame, ornament, snap-fit, no-glue, ready-to-print, easy-print, single-color