Red countdown with Santa peeking from the bottom and a white border
A ready-to-print Christmas countdown: a red front with a white border, Santa peeking from the bottom, leafy sprigs, snow dots and "Dias até o Natal" in white lettering. A numbered ring from 24 to 0 turns between the back and the front, and a window at the top shows one number at a time. Every day, turn the star tab one click clockwise and the number goes down; on Christmas the star reaches the top.
Ready to print: the back, the ring and the front, already prepared, no customizing needed
Size: 120 mm in diameter
One colour per layer: the front prints on a single-nozzle printer in red, white, black, skin tone and light red, with a pause at every colour change
Click on every number: a spring bump on the hub stops the ring exactly on each day
Hangs with magnets: three pockets on the back for 8 mm × 2 mm neodymium magnets, for the fridge or any metal surface
No supports: all three parts print clean without supports
Editable: made with the Christmas Countdown Circle; open it to change the text (it reads "Dias até o Natal", in Portuguese), the colours or the whole front
0.16mm High Quality profile. Three files, no supports: the back (with the hub beside it), the ring and the front.
Front, one colour per layer: single nozzle, one slab per decoration colour; the file pauses at every colour boundary so you can swap the filament.
Magnets: the back has three pockets for 8 mm × 2 mm neodymium magnets.
Print time and filament (0.16mm High Quality, 0.4mm nozzle, Bambu Studio estimate):
Back + hub: 1h12min · 35.64g
Ring: 1h01min · 26.23g
Front: 1h22min · 32.16g
Total: 3h35min · 94.03g
Tags: christmas, advent, countdown, calendar, kids, multicolor, magnets, no-supports, santa, red