Ready-to-print hanging photo frame in three sizes
A ready-to-print Mother's Day version of the Hanging Photo Holder in all three sizes: small for one photo, 10x15 portrait, and the wide one that holds three. Photos hang from a thread on little pegs inside a two-color textured frame, with "Mom" in script across the top.
Three sizes included: small for one photo, 10x15 portrait, and a wide frame for three photos.
Both wordings: the pack carries "Mom" and "Mãe" for all three sizes.
No AMS needed: every size is the same two-part build, bottom and top, each on its own plate in its own color, joined by small pins.
Nothing to customize: print the files as they ship and assemble as shown in the video.
Print times and filament: 0.16mm layer height, two plates per size — the first holds the bottom frame, the name and the small parts, the second holds the top frame. Small: color 1 1h37m, 29.8g; color 2 1h59m, 38.2g. 10x15: color 1 1h52m, 35.2g; color 2 3h01m, 60.0g. 3 Photos: color 1 2h19m, 48.9g; color 2 2h37m, 56.7g.
Recommended Settings:
Nozzle: 0.4mm
Material: PLA
Layer Height: 0.16mm
Wall Loops: 2
Infill: 15%
Supports: Not required
Plates and Colors: Three sizes in the pack — small, 10x15 and 3 photos. Every size is the same two-part build, bottom and top, each on its own plate in its own color and joined by small pins, so no AMS is needed.
Tags: photo-frame, mothers-day, ready-to-print, no-ams, multipart, two-color, three-sizes, gift