Christmas Tree Photo Frame 10x15

Ready-to-print 10x15 Christmas frame in four parts

Christmas Tree Photo Frame 10x15

Ready-to-print Christmas version of the Hanging Photo Holder in 10x15 portrait format. The photo hangs from a thread on little pegs inside a two-color textured frame, with a decorated Christmas tree down one side and a red bow with holly on the corner.

Key Features

Four-part build: base frame, top frame and two separate designs, with no parameters to customize.

Two-part frame: bottom and top halves print in their own color and join with small pins, so no AMS is needed for the frame itself.

Multicolor designs: the Christmas tree and the bow with holly print separately and are multicolor, so an AMS is recommended for them.

DXF footprint included: matches the frame exactly, for cutting a backing in another material.

Print times and filament at 0.16mm layer height: base frame, with the pins and wire ends 1h35m, 33.4g; top frame 2h30m, 54.8g; Christmas tree design 59m, 21.6g; bow and holly design 32m, 10.0g.

How to print

Recommended Settings:

Nozzle: 0.4mm

Material: PLA

Layer Height: 0.16mm

Wall Loops: 2

Infill: 15%

Supports: Not required

Plates and Colors: Four parts. The frame prints in two parts, the base frame (with the pins and wire ends) and the top frame, each on its own plate in its own color and joined by small pins, so no AMS is needed for the frame. The two designs share one plate and are multicolor, so they do need an AMS (or manual color swaps).

Tags: christmas, photo-frame, ready-to-print, multicolor, multi-part, holiday-decor, 10x15, home-decor