Five-piece VI sign in pink and black, with palm trees and a raised wordmark
A big VI in pink and black, palm trees inside the letters and the wordmark
raised off the face. Five pieces, printed separately, each in its own colour.
Finished sign: 230 × 174.6 × 24 mm, 30.4 mm deep counting the wordmark. It
stands on a shelf or a desk on its own, resting on the point of the V and the
foot of the I.
Five files, one per piece:
Letter — the outer border. Black. 3 h 40 min · 76.9 g
Name — the wordmark. Black and white. 2 h 14 min · 52.1 g
Back — the back plate. Black, painted. 1 h 19 min · 53.4 g
Inner-Shell — the liner inside the border. Pink. 1 h 17 min · 20.2 g
Palms — the palm trees. Translucent. 12 min · 2.9 g
Whole sign: 8 h 43 min · 205.5 g
Black, pink and white PLA cover the printed parts.
The palms print in translucent filament — against the back plate they read
as a soft silhouette instead of a flat white sticker.
The back plate is painted with acrylic paint and a sponge: dab the colour
on rather than brushing it, so it comes out mottled.
1. Liner into the border. It slides in from the back and stops flush with
the front face.
2. Palms onto the back plate, painted side up.
3. Back plate into the border, painted face in. It drops onto the 1.2 mm
ledge at the bottom of the shell.
4. Wordmark into its notch across the front. It is sunk 2 mm and stands
6.4 mm proud of the face.
The liner has 0.6 mm of clearance inside the border, everything else 0.16 mm. A
dab of glue on the back plate and the wordmark holds it all for good.
0.4 mm nozzle, PLA, 0.16 mm layers.
Supports are on in the Letter file only, for the ledge the back plate
rests on. The other four need none.
The palms file is slowed on purpose — a single layer at 20 mm/s with
aligned top and bottom patterns, so the sheet comes out even. Already set in
the file.
Size: 230 × 174.6 × 24 mm — 30.4 mm deep counting the raised wordmark
Time to print: 8 h 43 min — Letter 3 h 40 min, Name 2 h 14 min, Back 1 h 19 min, Inner-Shell 1 h 17 min, Palms 12 min
Filament: 205.5 g — Letter 76.9 g, Back 53.4 g, Name 52.1 g, Inner-Shell 20.2 g, Palms 2.9 g
Five separate files, one per piece, with the colours already assigned. The palms print in translucent filament, and the back plate is painted with acrylic paint and a sponge — dabbed on, not brushed.
Supports: the Letter file only — already switched on, for the ledge the back plate rests on. The other four need none.
Palms print as a single layer, slowed to 20 mm/s with aligned top and bottom patterns so the sheet comes out even.
Everything drops into place — the liner into the border, the palms onto the back, the wordmark into its notch. A dab of glue on the back plate and the wordmark keeps it all put.
Tags: gta, gamer, big-letter, sign, room-decor, multi-color, multi-part, wall-art