Green Christmas Countdown with Santa Hat

Green countdown with a Santa hat, a tree and a gift: turn the ring one click a day

Green Christmas Countdown with Santa Hat

A ready-to-print Christmas countdown: a green front with a Santa hat over "NATAL", a golden tree, a red gift and little stars. A numbered ring from 24 to 0 turns between the back and the front, and a window at the top shows one number at a time. Every day, turn the star tab one click clockwise and the number goes down; on Christmas the star reaches the top.

Key Features

Ready to print: the back, the ring and the front, already prepared, no customizing needed

Size: 120 mm in diameter

One colour per layer: the front prints on a single-nozzle printer in green, white, red and gold, with a pause at every colour change

Click on every number: a spring bump on the hub stops the ring exactly on each day

Hangs with magnets: three pockets on the back for 8 mm × 2 mm neodymium magnets, for the fridge or any metal surface

No supports: all three parts print clean without supports

Editable: made with the Christmas Countdown Circle; open it to change the text (it reads "Dias até o Natal", in Portuguese), the colours or the whole front

How to print

0.16mm High Quality profile. Three files, no supports: the back (with the hub beside it), the ring and the front.

Front, one colour per layer: single nozzle, one slab per decoration colour; the file pauses at every colour boundary so you can swap the filament.

Magnets: the back has three pockets for 8 mm × 2 mm neodymium magnets.

Print time and filament (0.16mm High Quality, 0.4mm nozzle, Bambu Studio estimate):

Back + hub: 1h12min · 35.64g

Ring: 1h01min · 26.23g

Front: 1h16min · 31.64g

Total: 3h29min · 93.51g

Tags: christmas, advent, countdown, calendar, kids, multicolor, magnets, no-supports, santa-hat, christmas-tree, gift, green