Set of three flower-shaped can opener keychains
A set of three flower-shaped can opener keychains, ready to print: a five-petal flower with a round center, a many-petal daisy with a small center, and a wide-petal daisy with a large center. Each flower has a can opener slot on the back that pops the tab of any canned drink, plus a keychain ring to hang it on your keys, bag or bottle.
Three Flower Designs: Five-petal flower, small-center daisy and large-center daisy, one 3MF file each (Flor-2-SideUp.3mf, Flor-3-OneColorPerLayer.3mf, Flor-Verde-SideUp.3mf)
3MF Pack, Not STL: Slicer projects (Bambu Studio / Orca style) with the color assignments already made
Multicolor and Single-Extruder Options: Two files are set up face up in multicolor (base color plus contrasting center); one is set up as one color per layer for a single-extruder printer with a filament change at the right layer
Built-In Can Opener and Ring: Tab-lifting slot on the back and a keychain ring on every flower
No Supports Required: Prints flat as set up in each file
Ready to Print: Pre-made pack, no customization needed; for your own image, see the customizable Can Opener Generator
Suggested Colors: Pastels such as lilac, peach and mint for the look in the photo
Recommended Settings:
Nozzle: 0.4mm
Layer Height: 0.16mm (first layer 0.2mm)
Material: PLA
Walls: 2
Infill: 15% Gyroid
Top/Bottom Layers: 6/4
Colors:
Flor-2-SideUp and Flor-Verde-SideUp: printed face up in multicolor, base color plus a contrasting center (2 to 3 filaments, AMS or manual color change).
Flor-3-OneColorPerLayer: set up as one color per layer for single-extruder printers, with a filament change at the layer change.
To improve the can opener slot bridges:
Bridge flow: 1.6
Bridge speed: 10
Supports: Not required — the rectangular case around the slot lets it bridge without supports.
Tags: can-opener, keychain, flower, cute, printable, stl-pack, multicolor, no-supports