Reporter-style mic holder with blank plaques for slicer personalization
Ready-to-print version of the Mini-Microphone, a decorative reporter-style microphone that holds a Hollyland wireless lavalier transmitter inside a cube "mic flag". This printable is meant to be personalized directly in the slicer, with no online customizer: the Bambu Studio project includes three blank plaques for the sides of the cube where you add your own logo or text. The customizable version with online personalization is the "Mini-Microphone" model on the site.
Bambu Studio project: the zip holds one project (MiniMicrophone.3mf) with 4 plates: cube, textured microphone head, handle + connector pin, and plaques
Blank plaques: three plaques for the sides of the cube, ready to receive your own logo or text in the slicer
Mic assembly: the mic slides into the cube from one side and its clip hinge snaps into a slot
Print times and weights (0.16 high quality): Handle + Connector: 48m 6g; Mic: 45m 6g; Mic Cube: 1h 15g; Covers: 3g 13m
Cover-plaque tips for thin logos: Wall Generator Arachne, Line Width 0.36, Hilbert curve 75% only on the top part
Recommended Settings:
Nozzle: 0.4mm
Layer Height: 0.16mm (High Quality profile) for all parts
Supports: Recommended for the Mic (textured head) — its lower half overhangs, so use supports or tree supports. The Mic Cube prints opening-down with no supports; the handle, connector and plaques need none.
Cover plaques (if thin logos give you trouble):
Wall Generator: Arachne
Line Width: 0.36mm
Suggested: Hilbert Curve 75%, top part only
Personalization: The three plaques are blank — add your text or logo directly in the slicer before printing.
Print time and filament (0.16mm High Quality):
Handle + Connector: 48m 6g
Mic: 45m 6g
Mic Cube: 1h 15g
Covers: 3g 13m
Tags: printable, 3mf-pack, bambu-studio, microphone, lavalier-holder, hollyland, slicer-personalization, multi-plate