Dragon bookmark printed around tulle, with frame and charm
A dragon in flight across a crescent moon, with bats, stars and cloud scrollwork, printed around a piece of fabric. The bookmark is 50 × 160 mm and 1 mm thick, and the frame it drops into is 51.9 × 161.9 mm and 1.76 mm thick.
The artwork's own outline is the piece and the middle is left open, so the fabric stretched behind it is what you see through the drawing.
Printed around fabric: the file carries a pause on layer 3. When the printer stops there, lay a piece of tulle, organza or any meshy fabric over the plate, stretched flat and held down with magnets, and let the print carry on — the layers that follow close over the fabric and lock it into the bookmark.
Black and gold: the file is set up for three filament slots but only two colours — black for the body, the scrollwork and the bats, gold for the moon, the stars and the dragon.
Separate frame: prints on its own and wraps the whole edge, hiding the layer lines and the fabric's cut edge all the way round. The bookmark drops into it and glues onto its floor.
Dragon charm: is a small dragon to hang from the tassel, its own file in a single colour, 34 × 35 mm and 1.2 mm thick.
Customizable version: the Fabric Bookmark Generator model, where you draw your own design.
Size: bookmark 50 × 160 × 1 mm · frame 51.9 × 161.9 × 1.76 mm · charm 34 × 35 × 1.2 mm
Time to print: 52 min — bookmark 43 min, frame 6 min, charm 3 min
Filament: 9.72 g — bookmark 7.70 g, frame 1.48 g, charm 0.54 g
Fabric Pause:
The file already carries a pause on layer 3 — you don't need to add it.
When the printer pauses, lay a piece of tulle or organza — any meshy fabric — over the plate, stretched flat and held down with magnets.
Resume the print.
Three filament slots, two colours — black and gold.
Tags: bookmark, fabric-bookmark, embedded-fabric, print-pause, dragon, charm, multicolor, reading