Round tissue box for a whole toilet paper roll
A round tissue box that holds a whole roll of toilet paper, with the paper pulled up through the hole in the middle. The slatted wood wall and the screw-on top can be matched to the room with an optional glue-on design.
Three parts: the box, the screw-in top, and an optional design that glues flat onto the face of the top.
Optional design: turn it off and the top is left plain — nothing is exported for it.
Separate design print: the design prints apart from the top, face up or face down like the keychains, so colours can be swapped without reprinting anything else. An AMS is only needed for the design itself; the box and the top are each a single colour.
Adjustable slatted texture: the ripado wall has adjustable flute width and depth.
Print profiles: both parts print without supports — the box floor-down, the top flange-down with the thread pointing up. Body: 0.20mm Standard, with fuzzy skin on the texture — 0.2 point distance, 0.16 thickness. 7h30m 112g. Lid: 0.16mm High Quality. 1h30 40g.
Recommended Settings:
Body: 0.20mm Standard, with fuzzy skin on the texture — 0.2 point distance, 0.16 thickness. 7h30m 112g
Lid: 0.16mm High Quality. 1h30 40g
Top Design: changing the wall generator to Arachne might help with the small details.
The box and the top both print without supports — the box floor-down, the top flange-down with the thread pointing up. The Design prints separately and glues flat onto the face of the top; it is optional, and an AMS is only needed for the Design, not for the box or the top.
Tags: tissue-box, toilet-paper, bathroom, screw-on-lid, no-supports, slatted-texture, customizable-design, glue-on-design