Screw-cap container with your design wrapped around
A small round container with a screw cap for jewelry, pills, beads, SD cards or other small items. Anything you draw, stamp or write in the design editor wraps around the container and prints raised on the outside wall, exactly as shown.
Sized to the contents: Enter the size of what goes inside; 1mm of clearance is added in every direction and the walls grow outward (default 25mm diameter x 25mm height).
Wraparound design: The design from the editor is raised on the outside wall, and the cap cut can be placed anywhere in it.
Optional keychain hole: A keychain hole can be added to the base.
Multicolor toggle: Off by default for a one-color file; on for a multicolor file, recommended only for 2-nozzle printers.
Print settings: 0.16 high quality, no supports.
0.16mm High Quality profile
Print time and filament (0.16mm High Quality, 0.4mm nozzle, single color, Bambu Studio estimate):
Pill box (35 x 15mm): 48min · 15.27g
Ring box (20 x 16mm): 29min · 8.34g
Tags: container, screw-cap, customizable, jewelry-box, pill-box, storage, no-supports, beginner-friendly