Customizable woven letter with name overlay and base
A large decorative letter with a woven rattan panel as its face, the name laid over it in two colors, standing in a matching base. Four printed parts assemble by snap fit, with no glue or screws.
Four-part assembly: frame, woven rattan back, name plate with its border, and a base slab with a slot the letter slides into
Snap-fit construction: the rattan panel clicks into the frame from behind and the name drops into a sunken seat in the frame's front face
Any letter, any name: the letter and the name are chosen in the design editor
Real basket weave: an over/under cane weave with the crests cut flat so it prints cleanly
Multipart, face down: every piece prints flat on its face with no supports; 0.08mm layer height is suggested for the rattan texture
Recommended Settings:
Rattan: 0.08mm High Quality profile
All other parts: 0.16mm High Quality profile
Print Time & Filament (A1, 0.4mm nozzle) — measured on the Noah example; the figures scale with the letter size:
Noah (170 x 197 mm) - Rattan 3h19m, 22g filament - 0.08mm
Border: 1h38m, 35g - 0.16mm
Name plate (name + name border print together on one plate): 2h23m, 45g - 0.16mm, of which name border 32g and name 13g
Base: 1h09m, 33g - 0.16mm
Whole letter: about 8h30m and 135g
Tags: decorative-letter, name-sign, rattan, multipart, snap-fit, no-supports, customizable, home-decor