Custom NFC keychain with an embedded tag pocket
A keychain built around your own artwork with a pocket that holds an NFC tag inside the print. It includes separate files to print face up, face down, or as a single one-color-per-layer plate for multicolor printers.
Custom artwork: create your design in the editor, with a separate color per sublayer
NFC tag pocket: sets the pocket depth — 0.6mm for stickers, ~1.2mm for thick tags
Pause to insert the tag: add a pause on the nfc layer, right before closing the hole
Three export modes: SideUp, SideDown and OneColorPerLayer
Border and attachment: optional raised border, plus a hole or a keychain ring
Important — Add a Pause: Add a pause on the NFC layer, right before closing the hole. When the printer stops, drop the NFC sticker or tag into the pocket, then resume so the next layers close over it and seal it inside.
Recommended Settings:
Nozzle: 0.4mm
Layer Height: 0.2mm
NFC Pocket Depth (NFCThickness): 0.6mm for stickers, 1.2mm for thick tags
Supports: Not required
Tags: nfc, keychain, customizable, multicolor, design-editor, nfc-tag-pocket, print-pause, intermediate