Hollyland mic holder with 3 customizable logo sides
A decorative mini reporter-style microphone that holds a Hollyland wireless lavalier transmitter inside a cube "mic flag". The cube has three shallow recesses (front, left and right) for separately printed plaques with your own logo or design, made in the design editor with up to 3 pages, one per side.
Compatible with Hollyland transmitters: the mic slides into the cube cavity from one side and its clip hinge snaps into a slot
Up to 3 customizable sides: front, left and right recesses each take a plaque; a side with no design produces no plaque
Plaques printed separately: choose face up (raised elements) or face down (flush inlay with a smooth face)
Textured microphone head: diamond-net grille joined to the cube by a connector pin, plus a handle
Exports: Cube, Head, HandleAndConnector and Cover1/2/3 (optional). Print times at 0.16 high quality: Handle + Connector: 48m 6g, Mic: 45m 6g, Mic Cube: 1h 15g, Covers: 3g 13m
Recommended Settings:
Nozzle: 0.4mm
Layer Height: 0.16mm (High Quality) for all parts
Mic Cube: print with the opening facing down
Covers: can be printed FaceUp or FaceDown
Supports: Not required for the Mic Cube, Handle, Connector or Covers. The lower half of the Mic (textured microphone head) overhangs, so supports are recommended for it (tree supports work well).
Cover parts (if you're having trouble with thin logos):
Wall Generator: Arachne
Line Width: 0.36mm
Suggested: Hilbert Curve top surface pattern at 75%, only on the top part
Print Time and Weight (0.16mm High Quality):
Handle + Connector: 48m 6g
Mic: 45m 6g
Mic Cube: 1h 15g
Covers: 3g 13m
Tags: microphone, hollyland, mic-flag, custom-logo, multi-part, gift, intermediate, multicolor