Hanging Photo Holder

Two-color hanging frame with custom text and DXF exports

Hanging Photo Holder Hanging Photo Holder — photo 2 Hanging Photo Holder — photo 3 Hanging Photo Holder — photo 4 Hanging Photo Holder — photo 5

A two-color textured frame that hangs from a thread and holds your photos, customizable with your own text or design. Pick a frame size — small, 10x15 or 3 photos — and the name or design comes out raised on the front.

Key Features

Multipart: the frame prints in two parts, bottom and top, each in its own color and joined by small pins, and the design prints separately. Assemble it as shown in the video.

AMS only for colored images: text and plain designs are one color per part, so each part is just its own plate and its own spool.

Colored images: print either face up or face down — pick whichever you prefer.

DXF export: exports DXF files that match the frame exactly, with the design cut out, so you can cut the same shape in another material. Simple designs without many holes work best.

Three sizes: whole model, both plates, 0.16mm layer height — Small (102 x 142 mm): 3h37m, 68g; 10x15 (142 x 202 mm): 4h54m, 95g; 3 Photos (242 x 142 mm): 4h57m, 106g.

How to print

Recommended Settings:

Nozzle: 0.4mm

Layer Height: 0.16mm (High Quality)

Material: PLA

Supports: Not required

Plates: The model prints as two plates — one holds the bottom frame part, the connector pins, the wire ends and the design; the other holds the top frame part. Each plate is a single color, so you only need an AMS when the design is a colored image.

Print Time and Filament (whole model, both plates, 0.16mm layer height):

Small (102 x 142 mm): 3h37m, 68g

10x15 (142 x 202 mm): 4h54m, 95g

3 Photos (242 x 142 mm): 4h57m, 106g

Variations

Tags: photo-holder, hanging-frame, customizable, multi-part, two-color, dxf-export, home-decor, gift

See all models