Turn the numbered ring one click a day until Christmas
A turning countdown to Christmas: a ring numbered from 24 down to 0 spins between a back disc and a front you design in the Design editor. A window at the top of the front shows one number at a time — every day, turn the star tab one click clockwise and the number goes down — on Christmas the star reaches the top.
Customizable front: draw or stamp the decoration in the Design editor, inlaid flush into the front (face down), standing on it (face up) or one color per layer for single-nozzle printers
Fixed size: 120 mm in diameter — the countdown is built for this size, so the canvas size can't be changed in the editor
Clicks on every number: a springy bump on the hub stops the ring exactly on each day, so the window always shows one whole number
Big, easy-to-read numbers: fixed numbers in a bold condensed font, sized to fill the window
Simple assembly: three pins on the back go into the hub, three on the hub go into the front (one fatter pin makes it go in the right way round), and the ring turns around the hub
Three prints, no supports: the back (with the hub beside it), the ring and the front, at 0.16 high quality
0.16mm High Quality profile. The front prints face down, face up or one color per layer, as chosen in Type.
Print time and filament (the Green Hat design, one color per layer, 0.16mm High Quality, 0.4mm nozzle, Bambu Studio estimate):
Back + hub: 1h12min · 35.64g
Ring: 1h01min · 26.23g
Front: 1h16min · 31.64g
Total: 3h29min · 93.51g
Tags: christmas, advent, countdown, calendar, kids, design-editor, multicolor, no-supports