Custom can opener keychain with an NFC tag inside
A keychain can opener with your own image on top and a pocket for an NFC tag inside the print. Position the can opener slot wherever it fits your design best.
Print it face up (multicolor with AMS, or with a pause and a manual color change), face down (the design prints separately and you glue it on), or one color per layer. Add a pause on the nfc layer, right before the pocket closes, and drop the tag in.
Any image: use your own SVG as the top design
NFC tag pocket: the tag is sealed inside the keychain
Adjustable slot: freely position and rotate the can opener slot
Hole or ring: choose how it attaches to your keys
Important — Add a Pause: Add a pause on the nfc layer, right before closing the hole. When the printer stops, drop the NFC sticker or tag into the pocket, then resume so the next layers seal it inside.
To improve the bridges:
Bridge flow: 1.6
Bridge speed: 10
Supports: Not needed if used with the rectangle. If removed and the border is curved, manually place supports only in the entrance.
Tags: keychain, can-opener, nfc, customizable, functional, tool, ring-pull, multi-color, gift